Corners, bays, wall to wall and other special spaces
- Talk to usWall to wallA track that runs between two walls. Measure wall to wall at track height. We take 20 mm off so the track fits between them.Send a photo
- Talk to usCornersTwo tracks that butt in the corner, or one curved track (inside 90° corners only; outside corners must butt). Measure each wall into the corner.Send a photo
- Talk to usBay windowsA curtain per window, or one continuous curtain with corner curves. Both need the angles at 135°. Send a photo with plenty of wall around it.Send a photo
- Talk to usKeeping your old trackEvery curtain comes with a matching track, so the heading and runners work together. Using your own? Pinch pleat needs a loose runner about every 100 mm; S Wave needs strung runners that swivel 360°, about every 60 mm.Send a photo
- GuideMotorised tracksCharge the motor before first use. If it stops short, turn it off and check the runners slide the full length by hand, the belt is joined and the joiner is tight, then reset the end points as the motor manual shows.Read the guide
Next guide
Curtains not hanging right?